AL 13 DT011 3-Piece Forged Wheels

AL 13 DT011 — 3-Piece Custom Forged Wheel

The AL 13 DT011 is a custom forged 3-piece wheel manufactured at AL 13's facility in Brea, California. Three independently machined components — a forged centre disc, a spun outer barrel, and a spun inner barrel — are assembled to the customer's exact offset and width specification using aviation-grade hardware.

The 3-piece architecture offers the widest offset and width range of any AL 13 construction, and the assembled wheel is fully serviceable: individual components can be rebuilt, refinished, or replaced independently. For enthusiasts who want a wheel that can be reconfigured for a future vehicle or restored to as-new condition, the DT011 is the definitive choice in the AL 13 range.

Available Sizes

The AL 13 DT011 is produced across a complete diameter range from 13 inches to 24 inches, with widths from 5J to 14.5J. All dimensions are to order — AL 13 machines each wheel to the customer's specified diameter, width, offset, and centre bore, with no standard-size inventory held.

Standard diameters: 13", 14", 15", 16", 17", 18", 19", 20", 21", 22", 23", 24". Extended diameters above 24" may be available as a special project — enquire at [email protected].

Width range: 5J – 14.5J. Widths beyond this range may be accommodated on request. Offset is fully custom — specify your required ET and AL 13 will machine to that dimension. Centre bore is machined to your vehicle's exact hub bore for a zero-clearance fit.

• Diameter: 13" – 24"
• Width: 5J – 14.5J
• Offset: custom ET to specification
• Centre bore: custom machined to vehicle hub bore
• Bolt pattern: 4×100 to 6×139.7 and non-standard patterns available

Technical Specifications

Every AL 13 DT011 is engineered and produced entirely in-house at the Brea, California facility. AL 13 controls the complete manufacturing chain — from forging through CNC machining to in-house finishing — ensuring consistent tolerances and finish quality across every wheel that leaves the building.

The AL 13 3-piece process produces three distinct components: the centre disc is forged from T6061 aluminium and CNC-machined to final geometry; the outer and inner barrels are spun from 6061-T6 sheet for seamless, consistent wall thickness. Assembly uses machine-threaded aviation-grade hardware at both flange interfaces, creating a rigid, airtight structure that can be taken apart and rebuilt.

This architecture allows barrel depths to be specified independently for inner and outer sections, enabling extreme offset configurations and very wide fitments. All 3-piece wheels are pressure-tested for airtight barrel sealing before dispatch from the Brea, California facility. Wheel weight is comparable to an equivalent 2-piece build; the premium over monoblock is modest given the serviceability advantage.

• Material: T6061 forged aluminium alloy (T6 heat treatment)
• Construction: 3-Piece Bolted
• Machining: CNC, multi-axis, in-house
• Finishing: powder coat, anodising, polishing, or custom paint — all in-house
• Load rating: SAE J2530 and TUV equivalent certification
• Centre bore: machined to vehicle specification
• Hardware: stainless steel (colour-match available on request)

Finish & Color Options

Because all finishing operations are performed in-house at Brea, AL 13 can accommodate virtually any colour, texture, or surface treatment. Standard finish families include:

• Brushed — linear directional brush on face, polished or contrasting lip
• Polished — full mirror polish across face, barrels, and hardware
• Gloss Black — hard powder coat, even single-colour coverage
• Matte Black — flat powder coat, minimal glare, aggressive stance
• Custom Colour — RAL or Pantone reference matched in powder coat or paint
• Two-Tone — contrasting colours on face and barrel/lip
• Anodised — permanent electrochemical colour, corrosion-resistant
• Chrome — full chrome or selective chrome on face or lip elements
• Custom Milling — pocketing, engraving, or bespoke spoke profiles on request

Standard powder coat finishes: 6–10 week lead time. Custom paint, polished, or chrome finishes: 10–14 weeks. Contact [email protected] with finish requirements for a lead time and pricing confirmation.

Vehicle Fitment Guide

The AL 13 DT011 has been installed on a broad range of vehicles — from lightweight track builds to large-format luxury SUVs — thanks to the full custom offset and centre bore machining available on every order.

Platforms regularly fitted with the DT011:

• Porsche — 911 (991, 992), 718, Panamera, Cayenne, Macan
• BMW — M2, M3, M4, M5, 5 Series, 7 Series, X5, X6, X7
• Mercedes-Benz — AMG GT, C63, E63, S-Class, G-Class, GLE, GLS
• Audi — RS3, RS6, RS7, R8, TT RS, Q7, Q8 RS
• Ferrari — 296, F8 Tributo, SF90 Stradale, Roma
• Lamborghini — Huracan, Urus, Revuelto
• Rolls-Royce — Ghost, Phantom, Cullinan, Spectre
• Bentley — Continental GT, Flying Spur, Bentayga
• McLaren — 720S, 765LT, Artura, GT
• Range Rover — Sport SVR, Autobiography, Defender V8

For confirmation on your specific vehicle, contact [email protected] with year, make, model, and intended tyre size and we will specify the correct diameter, width, offset, and bolt pattern for the DT011.

Other Bolt Patterns Available

AL 13 manufactures the DT011 to any bolt pattern. Configurations regularly ordered through Hodoor World:

• 4×100 — Honda Civic, Mazda MX-5, Toyota GR86, BMW 1 Series E8x
• 5×100 — Subaru WRX/STI, VW Golf Mk4/Mk5, Porsche Boxster 986
• 5×108 — Ford Mustang GT500, Land Rover Defender, Jaguar F-Type
• 5×112 — Audi, BMW (modern), Mercedes-Benz, VW (modern), Porsche Taycan
• 5×114.3 — Nissan GT-R, Toyota Supra A90, Honda NSX, Ford Mustang S197/S550
• 5×120 — BMW E/F/G-series, Range Rover, Rolls-Royce Ghost/Phantom
• 5×130 — Porsche 911 (991/992), 718, Panamera, Cayenne, Macan
• 6×139.7 — Toyota Land Cruiser, Nissan Patrol, Chevrolet Silverado/Tahoe

Non-standard patterns (5×98, 5×115, 5×127, 6×114.3 and others) available on request. Contact [email protected] to confirm availability.

How the AL 13 DT011 Compares to the AL 13 Range

AL 13 offers four construction types. All share the same T6061 material, the same Brea facility, and the same build-to-order approach — the choice between them is a function of your priorities:

If weight is the priority, DM monoblock is the answer. If fitment geometry demands extreme offset or wide body, DB or DT/DS are the path. If long-term serviceability matters — the ability to rebuild or refinish individual components over the years — 3-piece is the investment.

Explore the AL 13 Lineup at Hodoor World

Hodoor World stocks the full AL 13 catalogue. Browse other models to compare spoke architecture and design character:

• AL 13 DM001 — Monoblock Forged
• AL 13 DM004 — Monoblock Forged
• AL 13 DM007 — Monoblock Forged
• AL 13 DB001 — 2-Piece Forged
• AL 13 DB009 — 2-Piece Forged
• AL 13 DT002 — 3-Piece Forged
• AL 13 DT004 — 3-Piece Forged
• AL 13 DT009 — 3-Piece Forged
• AL 13 DS005 — 3-Piece Premium Forged
• AL 13 DS013 — 3-Piece Premium Forged

Looking for a different design? The AL 13 catalogue runs to over 30 models across DM, DB, DT, and DS series. Contact Hodoor World and we will match you to the right model.

Can't Find the Right Wheel?

If no catalogued AL 13 model matches your design vision or fitment requirement, two paths are available:

• Custom AL 13 design: AL 13 can engineer a completely bespoke spoke pattern to your brief. Minimum quantities apply. Contact [email protected] to open a conversation.
• Alternative brands: Hodoor World represents dozens of custom forged wheel manufacturers. Visit our custom wheels page for a wider view, or call +44 748 881 8747 to discuss alternatives.

How to Order

Placing an order for an AL 13 DT011 through Hodoor World:

1. Email [email protected] with vehicle details (year, make, model, trim), target diameter and width, and any finish preferences.
2. We confirm fitment, send a quote, and issue a proforma invoice.
3. Deposit payment initiates the order with AL 13 in Brea, California.
4. Production: 6–10 weeks standard finishes; 10–14 weeks polished or custom paint.
5. We manage shipping from Brea to your door, worldwide.
6. Balance settled before dispatch. Phone orders: +44 748 881 8747.

Frequently Asked Questions

Q: Is the AL 13 DT011 available from stock?
A: No. AL 13 builds every wheel to order with no standard inventory. Each DT011 is machined to the customer's exact diameter, width, offset, centre bore, bolt pattern, and finish. Lead time is 6–14 weeks.

Q: How long does production take?
A: Standard powder coat finishes: 6–10 weeks. Polished, chrome, or custom painted finishes: 10–14 weeks. Current lead times vary with production load — we will confirm at the time of enquiry.

Q: Can I order larger than 24 inches?
A: AL 13's standard catalogue runs 13"–24". Diameters above 24" may be available as a special project — contact [email protected] to discuss feasibility and pricing.

Q: What construction does the AL 13 DT011 use?
A: The DT011 is a 3-piece bolted wheel: a forged aluminium disc assembled with separate outer and inner spun barrels using aviation-grade hardware. The three-piece format delivers the widest offset and width range in the AL 13 catalogue and makes the wheel fully serviceable — each component can be replaced or refinished independently.

Q: Does Hodoor World ship internationally?
A: Yes, to all major markets — UK, EU, UAE, Australia, Japan, Hong Kong, USA, and beyond. Import duties and local taxes are the buyer's responsibility. Shipping costs are quoted with your order.

Q: What warranty applies?
A: AL 13 provides a structural warranty against manufacturing defects. Full warranty terms are provided at the time of order. The warranty does not cover road damage, improper installation, or cosmetic wear.

Discover Hodoor World

Hodoor World is a UK-based specialist in custom forged wheels, body kits, and performance components for premium and exotic vehicles. We supply customers across Europe, the Middle East, Asia, and North America, working directly with manufacturers including AL 13 Wheels, Brixton Forged, Vossen, and others.

Every product we supply is genuine, with verified fitment data and professional after-sales support. Read customer reviews on Trustpilot. Reach us at [email protected] or +44 748 881 8747.

Wheel Care

To maintain the finish and structural condition of your AL 13 DT011 wheels:

• Cleaning: pH-neutral, non-abrasive wheel cleaner. Soft microfibre cloth or brush. Avoid acid-based products on powder coat or polished surfaces.
• Frequency: Clean every 1–2 weeks, or after any track use. Brake dust is mildly corrosive; do not allow it to dry on the wheel surface.
• Polished surfaces: Apply wheel sealant or metal polish every 3–6 months to maintain gloss and resist oxidation.
• Powder coat: Inspect annually for chips. Touch up promptly to prevent corrosion at exposed aluminium.
• Salt/winter driving: Rinse with clean water after every trip on salted roads. Salt in joints or on bare metal accelerates corrosion significantly.
• Torque check: Re-torque wheel nuts/bolts after the first 50–100 km post-installation and at every subsequent tyre change. Use vehicle manufacturer's specification.
• Off-vehicle storage: Store in a cool, dry, dark location. Tyre bags protect against UV degradation of the sidewall.

AL 13 DT011 — International Delivery

Hodoor World delivers AL 13 DT011 wheels worldwide. Estimated transit after production completion:

• United Kingdom: 3–5 business days. See custom forged wheels UK guide.
• Germany: 4–6 business days. See custom wheels Germany guide.
• France: 4–6 business days. See custom wheels France guide.
• UAE / Dubai: 5–8 business days. See custom wheels UAE guide.
• Australia: 7–12 business days. See custom wheels Australia guide.
• Japan: 7–10 business days. See custom wheels Japan guide.
• USA: 3–5 business days (domestic from Brea, CA). See custom wheels USA guide.

All shipments fully insured and tracked. Import duties and local taxes are the buyer's responsibility. Contact [email protected] or +44 748 881 8747 for a shipping quote.